Emerson’s Virtual Training Courses

Course Duration: 4.5 days

Dates Offered: May 16-20 | Jun 13-17 | Nov 21-25

Description: The training program will be delivered by Emerson Certified Instructors, from Dubai over video link.

Day 1 – Field Instrumentation

• Fundamental of Pressure, how to measure, importance, application & selection
• Fundamental of Temperature, how to measure, importance, application & selection
• Fundamental of Level, how to measure, importance, application & selection
• Fundamental of DP Flow, importance, application & selection
• Exercises & Quiz
• Piping for instruments, tubing and Fittings: Impulse piping of transmitter, installation guideline & tapping points
• Process and Safety Requirement for Field Devices: Selection of Transmitter, Cable Gland, Self-draining position, Cable Laying
• Instrumentation best practices: Selection of Transmitter, installation, Power supply, loop checks and calibration criteria
• Flame & Gas: Basic technology on Catalyst, Open Path, IR
• Practical Demo: F&G

Day 2 – Flow Measurement

• Overview of Oil & Gas Flow Measurement
• Overview of Metering Systems and System Components
• Industry and regulatory standards
• Metering methodologies
• System error and uncertainty
• Description - Communications Interface with Host Computer
• Pre-commissioning & Commissioning Overview
• Custody Transfer metering application- Overview
• Senior Orifice & Turbine Meters
• Theory of Operation
• Installation Considerations
• Technology Advantage
• Coriolis and Vortex Meters
• Practical Demo: Function, Calibration and Limitations of Flow Metes- Basic Operations and Alarms
• Ultrasonic and Multiphase
• Theory of operation
• Selection and Sizing criteria
• Installation Best Practices
• Performance specifications
• Hydrocarbon Composition
• Practical Demo: Function, Calibration and Limitations of Flow Metes- Basic Operations and Alarms

Day 3 – Final Control

• Specifications and Terminology, Valve Characteristics
• Sliding Stem Valve & Actuator Design Options, Selection Criteria
• Bench Set Concept with Calibration demonstration
• Butterfly Valves, Ball Valves & Rotary Actuator Basics, Selection Criteria
• I/P Transducers & I/P Positioners
• FIELDVUE™ Digital Valve Controllers HH475
• FIELDVUE™ Digital Valve Controllers basics with AMS Trex
• FIELDVUE™ Digital Valve Controllers with ValveLink™ Software & Basic Diagnostics
• Tear down control valve, actuator and describe how they work
• Demonstrate Valve Diagnostics

Day 4 – Process Control and Safety System

• History of DCS
• Architecture and Major Components
• HMI PID graphics
• Historian
• Alarms and Events
• Diagnostics
• Loop Tuning
• Overview of Safety Instrumented System
• DCS Cybersecurity

Day – 5 Engineering documentation and Hands-on

• Engineering Documentation Overview (ISA, API)
• Process Flow Diagrams: Purpose, how to read, how to use
• Piping and Instrumentation Diagrams (P&ID) for process design, how to read, Information included, Documents linked to P&ID
• Practical Demo: Temperature Transmitter
• Practical Demo: Pressure Transmitter
• Practical Demo: Vortex Meter
• Practical Demo: Coriolis Meter
• Post Course Test

Course Duration: 4.5 days

Dates Offered: Feb 21-25 | Apr 18-22 | Aug 22-26 | Oct 24-28

Description: The training program will be delivered by Emerson Certified Instructors, from Dubai over video link.

Day 1 – Field Instrumentation

• Fundamental of Pressure, how to measure, importance, application & selection
• Fundamental of Temperature, how to measure, importance, application & selection
• Fundamental of Level, how to measure, importance, application & selection
• Fundamental of DP Flow, importance, application & selection
• Exercises & Quiz
• Piping for instruments, tubing and Fittings: Impulse piping of transmitter, installation guideline & tapping points
• Process and Safety Requirement for Field Devices: Selection of Transmitter, Cable Gland, Self-draining position, Cable Laying
• Instrumentation best practices: Selection of Transmitter, installation, Power supply, loop checks and calibration criteria
• Flame & Gas: Basic technology on Catalyst, Open Path, IR
• Practical Demo: F&G

Day 2 – Flow Measurement

• Overview of Oil & Gas Flow Measurement
• Overview of Metering Systems and System Components
• Industry and regulatory standards
• Metering methodologies
• System error and uncertainty
• Description - Communications Interface with Host Computer
• Pre-commissioning & Commissioning Overview
• Custody Transfer metering application- Overview
• Senior Orifice & Turbine Meters
• Theory of Operation
• Selection Criteria
• Installation Considerations
• Technology Advantage
• Coriolis and Vortex Meters
• Theory of operation
• Selection criteria
• Installation considerations
• Technology Advantages
• Practical Demo: Function, Calibration and Limitations of Flow Metes- Basic Operations and Alarms
• Ultrasonic and Multiphase
• Theory of operation
• Selection and Sizing criteria
• Installation Best Practices
• Performance specifications
• Hydrocarbon Composition
• Practical Demo: Function, Calibration and Limitations of Flow Metes- Basic Operations and Alarms

Day 3 – Final Control

• Specifications and Terminology, Valve Characteristics
• Sliding Stem Valve & Actuator Design Options, Selection Criteria
• Bench Set Concept with Calibration demonstration
• Butterfly Valves, Ball Valves & Rotary Actuator Basics, Selection Criteria
• I/P Transducers & I/P Positioners
• FIELDVUE™ Digital Valve Controllers HH475
• Control Valve Sizing and Selection - Introduction to Fisher Specification Manager
• Practical session on Liquid Sizing
• Practical Session on Gas Sizing
• Demonstration of Valve Diagnostics

Day 4 – Process Control and Safety System

• History of DCS
• Architecture and Major Components
• HMI PID graphics
• Historian
• Alarms and Events
• Diagnostics
• Loop Tuning
• Loop Tuning
• Overview of Safety Instrumented System
• DCS Cybersecurity

Day – 5 Engineering documentation and Hands-on

• Engineering Documentation Overview (ISA, API)
• Process Flow Diagrams: Purpose, how to read, how to use
• Piping and Instrumentation Diagrams (P&ID) for process design, how to read, Information included, Documents linked to P&ID
• Practical Demo: Temperature Transmitter
• Practical Demo: Pressure Transmitter
• Practical Demo: Vortex Meter
• Practical Demo: Coriolis Meter
• Post Course Test

Code: 2326

Course Duration: 4 days

Dates Offered: Aug 23-26

Description: This course is designed for technicians, engineers, and plant personnel who need to know installation, calibration, maintenance, and troubleshooting of measurement instrumentation.

The course explains how pressure and temperature instruments function and how they are installed and calibrated. It emphasizes installation, proper setup, and calibration of Analog and Smart Pressure and Transmitters. The course uses lectures and labs to teach the students. Those who complete this course will be able to:

• Correctly perform installation and setup procedures
• Properly Configure Pressure and Temperature Transmitters
• Properly Calibrate Pressure and Temperature Transmitters
• Perform basic troubleshooting

Code: 2327

Course Duration: 2 days

Dates Offered: Sep 7-8

Description: The course explains how DP Flow functions and how they are installed and calibrated. It emphasizes installation, proper setup and calibration of DP Flow Instruments. The course uses lectures and labs to teach the students.

Those who complete this course will be able to:

• Correctly install, configure and calibrate the DP Flow instruments
• Perform DP Flow troubleshooting

Code: 2333

Course Duration: 3 days

Dates Offered: Mar 9-11 | Oct 12-14

Description: This course is intended for technicians, engineers, and other plant personnel who need to know installation, calibration, maintenance, and troubleshooting of measurement instrumentation.

This 3-day course explains how level instruments function and how they are installed and calibrated. It emphasizes installation, proper setup, and calibration/verification of level instruments.

The course uses lectures and labs to teach the students. Those who complete this class will be able to:

• Correctly install Guided Wave Radar
• Transmitters
• Correctly install Non-contacting
• Radar Transmitters
• Properly calibrate Level instruments
• Perform basic troubleshooting

Code: RTG101

Course Duration: 4 days

Dates Offered: Feb 22-25 | Jun 7-10 | Nov 15-18

Description: This 4-day course covers the products range supplied by Rosemount tank Gauging. This course is suitable for project and maintenance engineers, and persons that are responsible for maintaining the tank gauging system at site.

This provides good coverage for Tank Gauging products supplied by Rosemount. It gives a general understanding on how to install, startup, commission, and maintain a tank gauging system. It also helps the trainee to understand how he can optimize and maximize the benefits of using Rosemount Tank Gauging systems.

Training courses are based on classroom instructions backed up with laboratory work to deliver the trainees with a well-balanced knowledge in an integrated manner.

Code: RTG102

Course Duration: 3 days

Dates Offered: Aug 2-4

Description: Tank Master is a 3-day course covering the Maintenance and inventory management software that communicates to the tank Gauging system. Tank Master is certified by OIML for inventory calculation as per API standards. This course helps the user to fully understand the Tank Master software and all its functionalities. It is suitable for individuals that are responsible for administrating and maintaining the tank Master software.

The course goal is to provide comprehensive knowledge about tank Master Software and its capabilities. It starts by demonstrating the different tools in Tank master and how it can be utilized, and then it continues to demonstrate that advanced capabilities of Tank Master when it comes to connecting to devices and host systems. The course also demonstrates troubleshooting and problem-solving techniques in Tank Master.

Training courses are based on classroom instructions backed up with laboratory work to deliver the trainees with a well-balanced knowledge in an integrated manner.

Course Code: D4230

Course Duration: 2 days

Dates Offered: Apr 12-13 | Sep 14-15

Description: This 2-day course prepares students to install, operate, and maintain Daniel multipath ultrasonic flow meters. In addition to classroom instruction, the training course includes hands-on experience using the flow meter, simulator, and diagnostic software.

Course Code: 2340/41

Course Duration: 1 day

Dates Offered: Aug 15

Description: Rosemount 8700 Series Magnetic Flowmeter: This course is intended for anyone that is involved with properly installing, wiring, configuring, and troubleshooting a Rosemount 8700 Series Magnetic flowmeter. Typical job functions include maintenance technicians, instrument technicians, and instrumentation engineers.

This 1-day course consists of a blend of lectures and hands-on exercises that cover how to install, configure and maintain the Rosemount 8700 Series Magnetic Flowmeter Systems composed of the Model 8712 and 8732 transmitters and the 8705 Flanged and 8711 Wafer Sensors. The students will learn the operation and capabilities of Local Operator Interface (LOI), 475 Field Communicator, and/or AMS Device Manager and how to use these tools to perform configuration. Common issues encountered and troubleshooting techniques will also be covered.

Rosemount 8800 Series Smart Vortex Flowmeter with HC475/prolink. This course is intended for anyone that is involved with properly installing, wiring, configuring, and troubleshooting a Rosemount 8800 Series Vortex Flowmeter. Typical job functions include; maintenance technicians, instrument technicians, and instrument engineers.

This 1-day course consists of a blend of lectures and hands-on exercises that cover how to install, configure, and maintain the Rosemount 8800 Series Smart Vortex flowmeter systems. The students will learn the operation and capabilities of the Local Operator Interface and HC475 Field Communicator and how to use these tools to perform configuration. Common issues encountered and troubleshooting techniques will also be covered.

Course Code: 2352

Course Duration: 2 days

Dates Offered: Jun 7-8

Description: This three-day class consists of a blend of lectures and hands-on exercises that cover the installation, configuration, and calibration of the Micro Motion metering system. Students will learn the Series 100012000 transmitters using ProLink® Ill, HC475 and the Series 3000 Interface devices. Students will perform a master reset and use ProLink Ill to configure the Series 100012000, perform a flow calibration, and solve troubleshooting problems. On the third day, based on students' needs, we will cover one or all the following topics RFT9739 transmitter, T-Series, R-Series, and Series 3000 platform and an introduction to the new Micro Motion's 5700's transmitter. Students will also learn the Modbus communications model, including RS-485 network requirements, memory structure, data types, functions, character framing, and message framing.

Course Code: D4540

Course Duration: 2 days

Dates Offered: Mar 15-16 | Jul 12-13

Description: This 2-day generic course provides students with an operational introduction to the Danpac Measurement & Control System. The instructor will explain the metering system architecture, its function, and administration. As well as showing how to navigate the operator interface, the course covers basic troubleshooting. The instructor will also explain the features and benefits of the control options available within DanPac. Students will receive supporting literature.

Course Code: ROX002

Course Duration: 2 days

Dates Offered: May 10-11

Description: The Roxar Zector technology provides accurate and real-time characterization of flow patterns. The voxel-based signal processing and electrode geometry provide information, including multiple flow velocity data and near-wall measurements. The objective of the Roxar MPFM2600 2-day course is to provide the participant with an understanding of the multiphase flow, components, and measurement principles of the instrument. The course focuses on providing the participants with detailed understanding of the set up and configuration; calibration data, reference fluid parameter set up, and operation of the meter. The course will cover interpretation and correlation of MPFM parameters versus influences of process conditions. Understanding the data is the key in order to make the right decisions for reservoir management.

Course Code: R4213

Course Duration: 4 days

Dates Offered: May 24-27 | Aug 9-12

Description: This 4-day course is appropriate for those who have either worked with a chromatograph for at least six months or completed the ‘Introduction to Gas Chromatographs’ course. It prepares participants to operate and repair a Model 700XA as chromatograph.

Course Code: 2200/2201

Course Duration: 2 days

Dates Offered: Apr 6-7

Description: This 2-day course provides a solid theoretical background in pH, conductivity and ORP measurements. This course also provides insight into the complicated amperemetric measurements of Chlorine, Dissolved Oxygen and Ozone. Students will learn the concepts of how amperemetric sensor work and how to calibrate each type of measurement.

Course Code: FG2100

Course Duration: 2 days

Dates Offered: Jul 6-7

Description: This is a 2-day basic course about Flame and Gas Detectors.

Topics:

• Flame Detection
• Gas Detection - Flammable and Toxic Gas
• Smoke/Oil Mist Detector (EExd model)
• Ultrasonic Gas Leak Detector

Course Code: 2153

Course Duration: 1 day

Dates Offered: Mar 16

Description: This 1-day course is the service requirements for oxygen analysis in general and the installation, operation, calibration and maintenance of the World Class and Oxymitter.